2024 KTM 350 XW-FWith its 250-like agility and 450-like power, the new KTM 350 XW-F is built for versatility. But, that doesn't mean it's compromised. Gaining instant recognition on its arrival in 2012, it has become a class-leading model due to its sheer rideability and low power output. For 2024 it brings an all-new attitude to the fray, charging toward the limit with next-level ability.Features may include:PREPERATION MAKES PERFECTAdjustabilityGetting READY TO RACE has never been easier. Thanks in part to its all-new suspension, the 2024 KTM XW-F range boasts totally tool-free suspension setup at both ends. At the rear, our legendary, race-winning PDS technology features an all-new shock absorber design with hand-adjustable dual compression controls. This allows riders to adjust high- and low-speed settings in a matter of seconds. On the front, the forks are also easily adjusted thanks to hand-adjustable clickers on the bottom of the fork shoe and on the fork top cap, making changing settings on the fly as easy as twisting the throttle.Air filter boxMaximum airflow with minimal water intrusion, a new air filter box is designed with precisely positioned inlet ducts aimed at preventing air deformation and maintaining filter protection. An enduro-specific splash protector under the airbox prevents water or dirt from splashing up from the rear wheel, while the Twin Air filter and air filter support design feature a simple fail-proof mounting system for secure and accurate filter setup, ensuring the air filter is easily accessed, without tools, for fast track-side upkeep.BENCHMARK LAPEngineLight, compact, and weighing only 63 lb (28.8 kg), the KTM 350 XW-F engine is an great bit of engineering. For 2024, the engine is tilted 2° backward with a repositioned sprocket for an improved center of gravity, while its high-revving power and intelligent low friction design provide the goods at every twist of the throttle.Offroad Control UnitAn all-new Offroad Control Unit - or OCU - under the seat replaces all the electronic fuses and relays. All outputs are switched depending on signals from the voltage regulator and the ECU always. In the event of over-current, outputs are deactivated each. This makes for easy error detection as the status of each output is indicated by a red or green LED light. This means diagnosing an electrical issue out on the trail is as easy as lifting the seat, and there's no more need to carry fiddly fuses.
